[Productiehuis] Audio to the HOLOPLOT speakers

[Elger Jonker]

But i like notification sounds, and i don't like my ears...

I see the issues with that. And i assume my dj software will have a hard time understanding what is going on. We can try ofc, but maybe not during the jam session.

I'll say people will have to use line out.

Regards,
Elger / Stitch


> On Jul 8, 2022, at 16:57, Morgan Hill <a at morganrhill.com> wrote:
> 
> You can certainly do that. It is a good way to blow your ears out with unexpected notification sounds ;)
> 
> Sending audio via FoH would really be my recommendation that way we can keep a physical handle on the volume.
> 
> Basics are beams are configured in Holoplot plan using a laptop or the Mac mini we are shipping with the system. Each beam is configured with a mapping to a Dante Dante channel. Then one uses the Dante routing matrixs to get audio to the speakers which unfortunately because it's Dante needs to be mapped to each module in the system indivually.
> 
> Limiters, EQ, Crossover etc are implemented on the modules and depending on the software version we run with can also be configured via plan on a per beam basis.
> 
> There isn't a volume knob so to speak as it is a bit hard to figure out what that means in such a system. So the volume control you have is on the sending side. If you use a virtual sound card then definitely turn off notification sounds and use an application with decent volume control like a daw.
> 
> -------- Original Message --------
> On Jul 8, 2022, 16:44, Elger Jonker < elger at ifcat.org> wrote:
> 
> So get a license for something like this? https://www.audinate.com/products/software/dante-virtual-soundcard?force=true > On Jul 8, 2022, at 13:13, Morgan Hill wrote: > > Voodoo magic pretty much sums it up. The speakers talk Dante the mixing desk will also talk Dante. So the answer is probably run all the audio through the desk. > > > Sent from Proton Mail mobile > > > > -------- Original Message -------- > On Jul 8, 2022, 13:01, Michiel Lombaers < mlombaers at mac.com> wrote: > > Voodoo magic is the way to go! Failing that you might try the FOH desk. Grtzzz, Mack > On 2022-07-08, at 12:54, Elger Jonker via Productiehuis wrote: > > Hi Morgan, > > How do i get audio to the holoplot speakers? Just a line out? Drivers? Special stuff? Voodoo magic? > > Regards, > Elger / Stitch > > _______________________________________________ > Productiehuis mailing list > Productiehuis at lists.mch2022.org > https://lists.mch2022.org/mailman/listinfo/productiehuis >
> <publickey - EmailAddress(s=a at morganrhill.com) - 0x2B0DC80B.asc>


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: Message signed with OpenPGP
URL: <http://lists.mch2022.org/pipermail/productiehuis/attachments/20220708/9c16a22f/attachment.sig>