[mch2022-deco] Fluroclock Installation

[Hugh Wells]

Hey Team:Deco,

Are you the right people to talk to about Fluroclock?

It is a 4 digit, 7-segment display made out of fluorescent tubes. Each
segment stands 90cm high and can be read from quite a distance. It has a
clock mode with 4511 drivers, but each segment is programmable so you can
write whatever you want on it (within the limitations of 7 segments).

It was recently exhibited at EMF2022 (I attach some photos).

If you are the right team, I wanted to confirm the installation location.
It needs 16A CEE and ethernet.

Thanks!

Hugh

-- 
This email was sent on behalf of CrabLab Limited. The contents and any 
attachments are expressly intended for the recipient(s). Should you receive 
this email in error you should contact the sender highlighting the error 
and remove the email from your system. The opinions expressed therein are 
not necessarily representative of the views of CrabLab Limited. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mch2022.org/pipermail/deco/attachments/20220608/31fa0e1e/attachment.html>

-------------- next part --------------
A non-text attachment was scrubbed...
Name: PXL_20220602_165241904.jpg
Type: image/jpeg
Size: 74961 bytes
Desc: not available
URL: <http://lists.mch2022.org/pipermail/deco/attachments/20220608/31fa0e1e/attachment.jpg>

-------------- next part --------------
A non-text attachment was scrubbed...
Name: PXL_20220602_102355848.MP.jpg
Type: image/jpeg
Size: 6267934 bytes
Desc: not available
URL: <http://lists.mch2022.org/pipermail/deco/attachments/20220608/31fa0e1e/attachment-0001.jpg>