<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
</head>
<body>
<p>Hi,</p>
<p>I tried using something like sketchup but this went all to crap
and broke.<br>
In the attachement is the tentbook from the tentsupplier. And I've
added some mockup/made up pictures to give you an idea.</p>
<p>The tents are 32mx32m.<br>
Here are some mockup/example pictures of a similair tent.</p>
<p>This is a side view from outside that was a larger tent, but I
voodoo-ed some to make it the actual size.</p>
<p><img src="cid:part1.PW3ypxd4.3f0pTsPq@mch2022.org"
moz-do-not-send="false" width="685" height="233"></p>
<p><br>
</p>
<p><br>
</p>
<p>This is a front-to back view from inside. Note, this picture
shows a larger tent as I could not voodoo something that would
line up properly.<br>
We actually have a total have 3 rows of poles front to back. At 8m
, 16m and 24m. I'm not counting the 32m ones as they are the
"end" of the tent.<br>
The pole in front of the stage is removed with an overspan for a
total of 8 poles in line of sight.<br>
See the floorplan mockup for that. The purple dots are the poles.<br>
</p>
<p><br>
</p>
<p><img src="cid:part2.FsqQ7DwM.WvyCbU7n@mch2022.org"
moz-do-not-send="false" width="608" height="445"></p>
<p>As you can see in these pictures the tent has an stagged arch
design looking the front-to-back and a weave design side-to-side.</p>
<p>The centerpoles are 9 meters in height. The 2 side poles are 7
meters in height. These poles are 4cm in diameter.<br>
The outer poles are 2.6 meters in height. These poles are 3cm in
diameter.<br>
</p>
<p>The roof height between the poles in the side-to-side view is the
lowest.<br>
Deduct 1 meter from the pole height to get the lowest roof height.<br>
<br>
</p>
<p>This is the overall floorplan/layout in the track tent.<br>
<img src="cid:part3.qR1bP9O2.ABMrZ91x@mch2022.org"
moz-do-not-send="false"><br>
</p>
<p>The tent is 32m x 32m and the squares are for measuring 8m x 8m.<br>
The stage front will be at the first 8 meter line. <br>
</p>
<p>
On each intersection there is a pole to support the tent roof as
shown in purple.<br>
<br>
Around the 6 poles in the rear there will be a truss setup
17mx9mx4m. (boxed 30cm x 30cm)<br>
This will have a base on each corner and 1 extra along the 17m
length in the middle at the centerpole.<br>
The truss will hold some lighting and on each of the corners in
the center truss there will be a 65" TV with the bottom of the TV
at 2 meter height.<br>
There will be a total of 4 65" TVs in the tent. A 65" TV will
cover around 1,5 x 1 meter.<br>
</p>
<p>The max height for the PA is 5,5 meters .<br>
I would expect the PA to line up with the front of the stage.<br>
If this is pushed back you might have to account for the stage
truss 6mx3mx4m with lights and stuff in there.<br>
</p>
<p>Hopefully this is enough info to create a design or to create a
setup.<br>
</p>
<p>Regards,</p>
<p>Dennis / =PsychiC=<br>
</p>
<p><br>
</p>
<p><br>
</p>
<p><br>
</p>
<p><br>
</p>
<br>
</body>
</html>